Technical Statement
Scope of use
Introducing the J-Vice JV100 Deck solution The J-Vice JV100 is for face fixed and top fixed systems. Provides a solution for 140 x 45, 190 x 45 and 240 x 45.
The J-Vice JV100 clamp is designed specifically for glass balustrades where wind loads are a big factor in design loading. Once the timber is in place the J Vice is placed in the corner, on one side of the double boundary joist.
Can Be used for Single, Double and triple joists, with the length of the Hex Head screws increasing as the joist depth increases.
Deck designer to ensure the structure can support the appropriate horizontal and vertical loads.
New Zealand Building Code (NZBC)
The product will, if employed in accordance with the supplier's installation and maintenance requirements, assist with meeting the following provisions of the building code:
- Clause B1 Structure: Performance B1.3.4(b)
- Clause B2 Durability: Performance B2.3.2(a), B2.3.2(b)
- Clause F4 Safety from falling: Performance F4.3.4(c)
Evidence
The product meets the requirements set out in the following documents, or relevant parts of cited standards within the documents:
The JV100 for deck barriers with a load of .75kN/m is certified by testing.
Airey Consultants ltd TEST REPORT FO GLASS VICE PRODUCTS LTD.
JV100
Supporting evidence
The product has and can make available the following additional evidence to support the above statements:
Product Criteria
Design requirements
The J Vice 100 Bracket for exterior Deck Barriers with a load of 0.75kN/m is certified by testing.
The bracket fixes the deck joists to the boundary joist. It resists twist from barrier loads and simultaneously works as a joist hanger.
Deck designer to ensure the structure can support the appropriate horizontal and vertical loads.
maximum wind zone of very high according to NZS3604:2011
The barrier is not on a parapet or a building greater than 3 stories high.
Installation requirements
Once the timber is in place the j-Vice is placed in the corner, on one side of the double boundary joist.
Refer to fixings table for post centers and screw lengths which are dependent on the joist lengths and depths.
Maintenance requirements
.
Quality Assurance
 |
ISO 9001 (Quality Management) |
