Product Description
The STEELFIX product range is made up of two pipe systems: stainless steel pipe and stainless steel press fittings.
The system is also available in galvanized steel pipe and press fittings.
Installations are a minimum of 3 x faster than traditional systems, as no threading or welding is required.
All STEELFIX fittings up to DN50 are fitted with a “Leak Before Pressed” (LBP) function in the O-ring, which reduces the risk even further. This LBP function ensures that fittings, which have not been pressed, will leak during the initial pressure test.
Operating Conditions
-35°C - 120°C / 16 bar
Component Sizes
NF100 Stainless Steel Pipe 1.4401 (AISI 316): 15, 18, 22, 28, 35, 42, 54, 76.1, 88.9 and 108 mm
NF110 Stainless Steel Pipe 1.4521 (AISI 444): 15, 18, 22, 28, 35, 42 and 54 mm
Galvanised Steel Pipe: 15, 18, 22, 28, 35, 42, 54, 76.1, 88.9 and 108 mm
Sprinkler Galvanised Steel Pipe: 22, 28, 35, 42, 54, 76.1, 88.9 and 108 mm
STEELFIX fitting diameters are 15, 18, 22, 28, 35, 42, 54, 66.7, 76.1, 88.9 and 108 mm
Installation requirements
Installation shall be performed by KE KELIT (NZ) Ltd. trained and approved installers, who shall be suitably qualified
Licensed Building Practitioners
Installation and maintenance - where applicable - of the STEELFIX Stainless Hot & Cold Pipe System, shall be in accordance
with the STEELFIX Australasian Technical Specification ver 8, STEELFIX Training Manual and the STEELFIX
Stainless Hot & Cold Pipe System Handbook 05/2016;