Application  Commercial

Description

The patented EcoLock VE1260 is a high torque motor driven Drop Bolt with up to 35kg pre-load/sideload tolerance. It can be installed vertically in the door frame (lock style) or horizontally in the frame header and has a symmetric dead-bolt mechanism to allow it to be used on 180° degree swing through doors.

The VE1260 is considered a “Green Product” as it consumes an inrush current of 290mA@12VDC only during locking and unlocking action (Active Mode), then in the locked or unlocked state (Sleep Mode), the Drop Bolt consumes current less than 15mA@12VDC.

A series of additional Strike Plates allow for door misalignment of up to ±12mm and a retrofit version of the FSH Eco Lock is available to suit the PADDE/TRIMEC ES8000 drop bolt footprint.

We recommend operating the product in 3-Wire-Mode (see installation manual). An optional LED red/green indicator unit is available.

• Releases with up to 35kg of Pre-Load/Side Load (3-wire mode) 
• Motorised locking device 
• Durability tested to 400,000 cycles 
• Multi-voltage from 12 to 30VDC 
• Sleep-Mode Current less than 15mA@12VDC 
• Fully monitored including Reed Switch for door position 
• Up to 1000kg Holding Strength 
• Retrofit version for Trimec/PADDE ES8000 (VE1260S Square Edge Version)

Warranty

Mechanical - 5 years

Electronic - 1 year

Finish - Refer to allegion.co.nz/finisheswarranty