Durepon® EZP
DUREPON® EZP is a two pack epoxy primer that is enhanced with zinc phosphate pigment for inhibitive corrosion protection on mild steel.
DUREPON® EZP QUICKTURN™ hardener is used where faster overcoat time is required in standard conditions. It also acts as a cold cure hardener for cooler climates, curing down to 5°C (standard hardener limited to above 10°C).
DUREPON® EZP can be overcoated with epoxy, polyurethane or acrylic finishes depending upon the end requirements.
Uses
DUREPON® EZP is suitable as a primer for steelwork in for a wide range of applications including commercial construction, manufacturing & chemical plants, power generation and sporting facilities.
Benefits
- Protects steel against corrosion
- Can be applied by brush, roller, conventional spray or airless spray
- Quickturn hardener allows the product to be used during colder months
Features
- Inhibitive epoxy primer for steel and other prepared surfaces
- Smooth finish
- Anti-corrosive pigmentation
- Good chemical and solvent resistance
- Quickturn™ fast cure hardener available
- Good chemical and solvent resistance
