Cabot's Garden Furniture Oil
It doesn’t take long for outdoor timber furniture to lose its lustre. Cabot’s Garden Furniture Oil Kit is here to help! This oil makes coating garden furniture easier by removing the hassle of choosing the right applicator for your project. The kit includes a new applicator mitt – perfect for coating legs and arms – as well as an over-cap, which doubles as a tray. The highly durable, low odour oil is designed to provide protection to all exterior surfaces and lasts twice as long as traditional garden furniture oils.
Cabot’s Clear Finishes and Oils are certified under Eco Choice Aotearoa.
SPECS
-
AreasExterior timber, Timber garden furniture
-
Clean UpWater
-
Sizes500ML, 1L, 2L
-
Coverage12 M2/L
-
Recoat Time2 Hours
-
Safety Data Sheet
PREPARATION
| Preparation | For best results with weathered grey timber, sand timber back to fresh substrate. Clean with Cabot's Deck Clean following label instructions. |
APPLICATION
| N/A |
MAINTENANCE
Every 12 months check your coated timber for changes in colour or water repellency diminishes due to weathering. When required,
1. Clean the surfaces with Deck Clean as per label instructions.
2. Recoat with 2 coats of Garden Furniture Oil.
• Use Cabot’s Clean & Care Exterior Wipes to refresh exterior timber furniture and help remove dirt, dust and bird droppings.
HOW TO VIDEOS
How to Recoat Your Outdoor Furniture
Range
Colour representations in brochures and websites should be used as a guide only for your colour selection due to printing and screen limitations. The actual colour achieved will be influenced by your timber type, tone, grain and application rate. To ensure you achieve the finish you want, we recommend that you test your colour choice at home prior to coating.
Available sizes
Product Calculator
If you are unsure on how much product you need, please use our product calculator. Please note minimum length/width value is 1 metre and maximum is 50 metres.
-
0 SQM
-
0 Litre
