Alement 64 is 103mm wide center glazed partitioning system, with profile height of 25 or 44mm. There is a wide range of options for mullions, Transoms, Door frames.
Offering some of the biggest glazing pockets in its class, Alement 64 will easily accept 12.38 Lam glass.
The system is designed for ease of use, we have built in screw ports and stacking bracket locators to allow for all build solutions.
All sections are extruded with 80% recycled aluminium content and our standard finish is premium Niche anodised, this offers a more consistent finish and a slightly more Matt finish, offering the natural look.
Scope of use
Alement 64 has been designed for interior partitioning using 64mm steel stud with 1 layer of 13mm plasterboard each side. Ideal for ceiling heights under 3.2m (but not limited to)
The system can be configured in many ways to achieve the look you want, with a range of removable beads on Mullions,Transoms and Glazing bars.
The only restrictions for the glazed walls will be determined by the NZ Glazing Standards, we are happy to work through this with you.
Our sections meet all NZ standards for extruded aluminium and surface finish.
Alement 64 can be used along side our DesignLine system, Alement 92, Alement Doors, ALement Sliding Doors and Alement MultiLayer
New Zealand Building Code (NZBC)
The product will, if employed in accordance with the supplier's installation and maintenance requirements, assist with meeting the following provisions of the building code:
- Clause B1 Structure: Performance B1.3.1, B1.3.2
- Clause B2 Durability: Performance B2.3.1(b)
- Clause F2 Hazardous building materials: Performance F2.3.1
The product has and can make available the following additional evidence to support the above statements:
Use in Service History
PSL have been supplying aluminium systems to the New Zealand
construction sector for over 20 years
Alement 64 can be installed in many configurations. There are often multiple ways to achieve the same look with different products.
Typically the system works best with ceiling heights under 3.2m. Glazing run lengths are determined by NZ glazing standards.
The system can accommodate full height doors, aluminium or timber both hinged or sliding.
Partitions need to have seismic restraints such as Tracklok partition brace
Install in accordance with Autex PSL installation requirements, for Alement 64
should be washed down with warm water & a mild soap solution. Fine brushes
may be used to loosen attached grime - the use of anything stiffer or abrasive
may result in damage to the surface. Acid or alkali cleaners should not be
used, these will damage anodic films & may discolour coloured joinery.
Where greasy deposits are present, cleaning of the anodising maybe by means of
a soft cloth dipped in white spirit, or a mild liquid scourer followed by
wiping with a dry rag. Make sure no solvents come into contact with other parts
of the window.
NB: Solvents must
be kept from contact with the vinyl glazing gaskets. It is essential to rinse
after cleaning with copious applications of clean water particularly where
crevices are present and then dry the glass to avoid any marks.
Rural: Every 6
Urban: Every 3
Marine environments: (within 1 km of the sea): 6 monthly warm water detergent
wash, as well as monthly cold water washing.
- Provide this
warranty on the installer/applicator standard form.
- Commence the warranty
from the date of practical completion of the contract works
||ISO 9001 (Quality Management)
||New Zealand Made