Premium New Zealand
made door system containing 80% recycled content. Purposely designed
for interior use in offices, apartments and many other applications.Our door sections have square edges and are 45mm thick offering stability to any sizes opening.
Stile widths are 75mm, 100mm, 125mm. Rails and Transoms in 75mm, 100mm and 150mm.
Our sections are ex stock in 2.8m lengths in mill finish which can be powder coated in any colour of your choice. We carry premium Niche anodised finish ex stock.
All systems have
a range of acoustic seals. Contact us for the best solution to the
Scope of use
Our door sections can be used in internal and external locations for hinged doors, internal for sliding doors, Bi folding and pivot.
The door weights can make a difference to the user experience and this should be taken into consideration to determine the panel size. The PSL Team can help with this.
New Zealand Building Code (NZBC)
The product will, if employed in accordance with the supplier's installation and maintenance requirements, assist with meeting the following provisions of the building code:
- Clause B1 Structure: Performance B1.3.1, B1.3.2
- Clause B2 Durability: Performance B2.3.1(b)
- Clause F2 Hazardous building materials: Performance F2.3.1
The product has and can make available the following additional evidence to support the above statements:
Use in Service History
PSL products have been used in New Zealand construction sector for over 20 years
All door sections are in 2.8m lengths, longer lengths can be arranged.
If you require doors taller than 2750mm, contact us so we can confirm the door will operate correctly and we can advise on the number of hinges to the door size.
Typically hinged doors would be a maximum width of 1100mm, sliding doors can be 2800 wide x 2750 tall. We can do doors as long as 5.0m.
Doors can have transom and mullions.
All doors shall be fixed together using PSL fixing packs which included all spacers, bolts and plugs required to construct a door panel.
Most doors will require a brush seal to the leading edge, we have proprietary seals for the doors, these vary depending on the requirements
should be washed down with warm water & a mild soap solution. Fine brushes
may be used to loosen attached grime - the use of anything stiffer or abrasive
may result in damage to the surface. Acid or alkali cleaners should not be
used, these will damage anodic films & may discolour coloured joinery. Make sure no solvents come
into contact with other parts of the window.
NB: Solvents must
be kept from contact with the vinyl glazing gaskets. It is essential to rinse
after cleaning with copious applications of clean water particularly where
crevices are present and then dry the glass to avoid any marks.
Rural: Every 6
Urban: Every 3
Marine environments: (within 1 km of the sea): 6 monthly warm water detergent
wash, as well as monthly cold water washing.
- Provide this
warranty on the installer/applicator standard form.
- Commence the warranty
from the date of practical completion of the contract works
||ISO 9001 (Quality Management)
||New Zealand Made