Protecta Protecta FR Putty Pad is designed for use in fire-rated gypsum wall systems where electrical switches, socket outlets, or similar services penetrate the wall lining and compromise the fire resistance of the partition. Assessed to AS1530.4:2014 and AS4072.1:2005, the non-setting putty pad reinstates the fire and acoustic performance of the wall for up to 2 hours, depending on the wall construction. Designed for interior use only, the system helps prevent the passage of fire, smoke, sound, and air leakage through service openings. FR Putty Pad may be installed internally or externally to the socket or wall box and is suitable for new construction, retrofit, and maintenance applications.
Protecta Protecta FR Putty Pad is designed for use in fire-rated gypsum wall systems where electrical switches, socket outlets, or similar services penetrate the wall lining and compromise the fire resistance of the partition. Assessed to AS1530.4:2014 and AS4072.1:2005, the non-setting putty pad reinstates the fire and acoustic performance of the wall for up to 2 hours, depending on the wall construction. Designed for interior use only, the system helps prevent the passage of fire, smoke, sound, and air leakage through service openings. FR Putty Pad may be installed internally or externally to the socket or wall box and is suitable for new construction, retrofit, and maintenance applications. Refer to firestopcentre.co.nz for FC tech drawings, product information, and test reports.
Protecta FR Putty Pad has been assessed to AS1430.4:2014 and AS4702.1:2005.
Protecta FR Putty Pad has been tested and assessed to AS 1530.4:2014 and AS 4072.1:2005, providing fire resistance ratings (FRR) when applied to fire-rated substrates in accordance with the relevant tested system, tech drawings and product information.
Please refer to below links.
Protecta FR Putty Pad product page
Protecta FR Putty Pad BPIR Sheet
Protecta FR Putty Pad should be used for interior applications in fire-rated walls where protection against the spread of fire, smoke, and sound through penetrations for electrical switches and socket outlets is required.
The product must be installed in accordance with the relevant tested and assessed systems to AS 1530.4:2014 and AS 4072.1:2005.
Refer to firestopcentre.co.nz for FC tech drawings, product information, and test reports relating to specific application, design, and installation instructions. Products must not be modified in any way that may compromise performance. All fire-rated service penetrations must be labelled in accordance with AS 4072.1:2005.
Protecta products should be stored in a clean, dry location and kept in their original packaging prior to installation.
Protecta passive fire protection products have no specific maintenance requirements. Damaged products should be repaired or replaced to maintain the required FRR of the fire-rated system.
PRO-PUTTYCS/RS
This product has no warnings associated with it.
