CS Cavity Sliders CS Cavity Slider

Product Description

The CaviSlider range offers high-quality cavity sliding door systems, available in standard sizes or custom-made to order. The CS Cavity Slider is engineered to meet most of your interior sliding door needs. Continuously improved since its original design in 1986, it features various detail options for customisation, allowing you to create a specific look or unique solution. Beyond its space-saving benefits in bathrooms, hallways, and laundries, the CS Cavity Slider can confidently be used as an architectural feature in any project. Special sizes, timbers and profiles are available on request (grooved jambs are mitred). Supplied fully assembled, with or without a door fitted.

• Patented cavity frame is fully tested and guaranteed. It is engineered from high quality heavy duty extruded aluminium.
• Door and carriages can be removed without removing wall linings.
• Available as Single or Bi-Parting (double) units.
• Fits into a standard thickness wall (70, 90 or 140mm framing).
• Supplied fully assembled for on-site installation.
• No visible floor guides.
• Can be provided with Fixed Head Jambs that don’t need to be removed to maintain the door 

Scope of use

CS Cavity Sliders units have been appraised for use with sliding doors in internal locations in residential, commercial and light industrial buildings.

New Zealand Building Code (NZBC)

The product will, if employed in accordance with the supplier's installation and maintenance requirements, assist with meeting the following provisions of the building code:

• Clause B1 Structure: Performance B1.3.1, B1.3.2, B1.3.3(a), B1.3.3(f), B1.3.3(h), B1.3.3(j), B1.3.4, B1.3.4(a), B1.3.4(b), B1.3.4(c), B1.3.4(d), B1.3.4(e)

  Performance B1.3.1, B1.3.2 and B1.3.4. CS Cavity Sliders meet the requirements for loads arising from self-weight, earthquake, wind and impact [i.e. B1.3.3 (a), (f), (h) and (j)]. See Paragraphs 8.1–8.3. 

• Clause B2 Durability: Performance B2.3.1, B2.3.1(b), B2.3.1(c)

  Performance B2.3.1 (a) not less than 50 years, (b) 15 years and (c) 5 years. CS Cavity Sliders meet these requirements. See Paragraphs 9.1–9.3. 

• Clause F2 Hazardous building materials: Performance F2.3.1

  Performance F2.3.1. 

Supporting evidence

The product has and can make available the following additional evidence to support the above statements:

	BRANZ Appraisal 900
	CS For Doors Specification Guide

Use in Service History

CS Cavity Sliders have been successfully used in commercial, residential and institutional projects in New Zealand and Australia since 1986. CS Cavity Sliders are backed by a 10 Year Written Guarantee.

Product Criteria

Design requirements

Refer to the CS Product Guide for design parameters. Units can be supplied with timber jambs or prefinished powdercoated aluminium jambs in a variety of colours.

CS Cavity Sliders are designed to fit standard stud walls (nominally 100 mm). Options are also available for 70 mm, 94 mm and 140 mm stud walls. An intermediate stud is included in the framing for stability in all units for doors wider than 920 mm.

Accessible cavity sliders require a minimum door width of 910 mm.

Special sizes, timbers and profiles are available on request. CS Cavity Sliders can be specified with almost any choice of door, including the aluminium CaviDoor range. Door carrying capacity: 120kg using standard 2-wheel carriages. 4-wheel carriages are supplied for heavier doors.

Installation requirements

Maintenance requirements

Refer to instructions on powder coated aluminium product maintenance.  Under normal circumstances, CS Cavity Sliders require no maintenance.

In high use situations, the carriages will eventually need replacing. Replacement carriages and instructions on replacement are available from Cavity Sliders.

Any service requirements should be referred to one of our branches

Warrantees

Ten year written warranty on CS Cavity Sliders.

Company Product Information

Environmental

Relationships

New Zealand Made

Videos