Narrow your search

SUPPLIERS
BRANDS

Search Result for Partitions, screens and doors » Hallmark Cavity Slider – Extra-Wide & Extra-High units

Hallmark Cavity Slider – Extra-Wide & Extra-High units

Premium cavity sliders from New Zealand's largest kiwi-owned door manufacturer

The following information has been provided by Hallmark demonstrating how this product complies with the Building Product Information Requirements.

Send to friend

Product Description

OPENING & CLOSING: Soft Close, Soft Open, and Jexis

JAMB: Timber Grooved, Timber Architrave, Aluminium Architrave, Aluminium Concealed Jamb

FINISHING: Standard Height or Flush Ceiling

Our system caters for extra-wide or extra-high units with steel reinforcement. We offer extrusions with one-cell, two-cell, or three cell sections and a range of reinforcement options.

DOOR LEAF: Paint Quality, Grooved, Veneer, and Timber or Aluminium Framed Glazed options

SIZES:

Doors 1980-2600mm high x 1211-1600mm wide to be 37mm thick
Doors 2601-3600mm high x 1601-2400mm wide to be 42mm thick
Cavity Slider Doors 2701-3600mm high x 1801-2400mm wide require 140mm stud cavity pockets
Cavity Slider Doors 2701-3600mm high x 1801-2400mm wide must have opening jambs set back 10mm from each face on each side of the cavity pocket opening
Contact us about other sizes
See trim size calculator at our website

DRAWINGS: CAD downloads at website

SUSTAINABILITY: All slider pocket timber is FSC-certified NZ Pine

Further info:
https://www.cavityslider.co.nz/

Compliance Statement

Product Class

Scope of Use

Hallmark Cavity Sliders are designed for, but is not limited to, use in projects within the following scope:

Housing and residential apartment buildings, and their associated ancillary and outbuildings - interior use.
Commercial buildings, and their associated ancillary and outbuildings - interior use

Hallmark Cavity Sliders may be used in projects outside this scope if other parties such as architects or specifiers establish appropriate design and installation requirements.

New Zealand Building Code (NZBC)

The product will, if employed in accordance with the supplier's installation and maintenance requirements, assist with meeting the following provisions of the building code:

Clause B2 Durability: Performance B2.3.1(b)
Hallmark Cavity Sliders have a durability beyond 15 years when correctly installed and maintained, based on historical in-market use.
Clause D1 Access routes: Performance D1.3.1(b), D1.3.1(c), D1.3.4(f)
Hallmark Cavity Sliders can be used within as accessible route where design consideration is given to compliance to NZBC D1/AS1, paragraph 7.0. Doors to be installed with door handles that meet the requirements of NZBC D1/AS1 clause 7.0.5. The selection of hardware to meet these requirements is not the responsibility of Hallmark Group.
Clause F2 Hazardous building materials: Performance F2.3.2, F2.3.3
Hallmark Cavity Sliders and Doors are manufactured using inert, nontoxic materials. If required, Hallmark Door vision panel glazing complies with NZS 4223.3.

Evidence

The product meets the requirements set out in the following documents, or relevant parts of cited standards within the documents:

NZS4223.3: 2016 Code of practice for glazing in buildings Part 3: Human impact safety requirements

Product Criteria

Design requirements

Hallmark Cavity Sliders are for interior use.
This product is not suitable for use in saunas, steam rooms, smoke houses etc.
This product is not fire rated. See www.hallmarkgroup.co.nz/fire-doors for Hallmark fire rated doors.
Hallmark Cavity Sliders are designed for, but is not limited to, use in projects within the following scope:

Housing and residential apartment buildings, and their associated ancillary and outbuildings - interior use.
Commercial buildings, and their associated ancillary and outbuildings - interior use

Hallmark Cavity Sliders may be used in projects outside this scope if other parties such as architects or specifiers establish appropriate design and installation requirements.

Installation requirements

Inspect Cavity Slider units and doors for freight damage and defects. Hallmark must be notified within 4 days if damage has occurred.
Cavity Slider units and doors must be installed in dry buildings only. When installed in situations with excessive air movement (i.e. buildings not at ‘lock up’ stage) warranty is voided. Interior doors must not be installed within the direct air movement of an air temperature controller.
Warp exceeding 5mm is considered a defect on doors up to 2400x910mm. Doors exceeding this size carry no guarantee against warp. Hallmark accepts no responsibility for defective doors when the moisture content of the timber exceeds 18%.
Install the door in accordance with the consented or design drawings. Ensure doors are installed plumb, level, and in plane, within the tolerances set out in the MBIE Guide to materials, tolerances, and workmanship in residential construction.

Maintenance requirements

The track system – head track and wheel carriage units - and other hardware should be checked annually for proper operation and to ensure fixings remain tight.
Doors installed in bathrooms or laundries that become scratched or damaged are to have the coating repaired immediately. Any repair work must be carried out under the instructions of the coating manufacturer.

Manufacturer

Legal Trading Name:

Hallmark Group

Business Email:

sales@hallmarkgroup.co.nz

Company Website:

www.hallmarkgroup.co.nz

Contact Number/s:

03 3134754
0800 486237

Product Identifier

N/A – SEE WEBSITE FOR PRODUCT OPTIONS

Warnings

This product has no warnings associated with it.

Date last validated: 10 June 2025

Date last updated: 10 June 2025


Company:	Hallmark Group
Physical Address:	355 Flaxton Rd Rangiora Rangiora
Postal Address:	PO Box 413 Rangiora
Telephone:	03 3134754
Free Phone:	0800 486237
Email:
Website:	www.hallmarkgroup.co.nz

Hallmark Group

Hallmark Group is New Zealand's leading manufacturer of interior doors and decorative products. Hallmark has served NZ’s architecture & construction industries for over 25 years. Sector specialties include Hotel & Accommodation, Education, Hospitals & Aged Care, Commercial, and Residential. Hallmark’s project management team provide expertise and industry knowledge. Hallmark’s commitment to quality and reliability has made it the supplier of choice for NZ’s architecture & construction industry.

Products

	a - Fire Doors
	b - Acoustic Doors
	c - Standard Doors & Veneer Doors
	d - Oversized & Specialty Doors
	e - Bifold & Sliding Doors
	f - Cavity Sliders
	g - Urbinos™ aluminium jamb door sets
	h - EuroDoor™ European-style doors
	i - PureMatte™ High Pressure Laminate
	j - DecoForme™ decorative battens