Polyfon™ is a made in NZ, high sound absorbing polyester ceiling panel designed to control unwanted noise in interior spaces. Polyfon is available in 15, 25, and 40mm thickness options providing NRCs of 0.90 and 0.95. They are available in a range of decorative acoustic laminate finishes from plain white, greys, black, colours and prints.
Polyfon™ is an ideal sound absorber panel, glue or fastener fixed to solid linings or in a suspended grid or frame, for call centres, open plan offices, cafes, halls, classrooms, libraries etc. Manufactured from polyester fibre board laminated with fire resistant glass mat acoustic facing.
Polyfon™ has a Fire Material Group Number 1-S by NZBC Building Product Specification Parts 8.5.4 or 8.5.5, tested in accordance with ISO 9705 or ISO 5660.
Warranty:15 year limited warranty against manufacturing defect, extendable to 30 years when registered for Asona’s Renew and Reuse program.
Polyfon™ is a made in NZ, high sound absorbing polyester ceiling panel designed to control unwanted noise in interior spaces.
This product is designed to be mounted directly, suspended or laid into a two-way exposed grid system and installed to manufacturer’s and AS/NZS 2785:2020 Standard’s requirements. Panels are not to support any weight and equipment shall be independently supported.
• For interior use only, and not in direct contact with water.
• Not for use with negative air return plenums.
• Maximum humidity/temperature 99% R/H at 45°C.
• Back loading — No overlay loads, M&E services and point loads to be independently supported.
B2 Durability – Clause B2.3.1 (c) (i): Asona Polyfon with only normalmaintenance will have a minimum durability of at least 5 years when installed in accordance with; manufacturer’s installation requirements and AS/NZS 2785:2020.
In use history. No test methods available.
C3 Fire – Clause C/AS2 4.12.1: Asona Polyfon has a Fire Material Group Number 1-S by NZBC Building Product Specification Parts 8.5.4 or 8.5.5, tested in accordance with ISO 9705 or ISO 5660..
Polyfon™ is an ideal sound absorber panel, glue fixed to solid linings or in a suspended frame, for call centres, open plan offices, halls, classrooms, libraries etc.
This product is designed to be mounted directly, suspended or laid into a two-way exposed grid system and installed to manufacturer’s and AS/NZS 2785:2020 Standard’s requirements.
Soiled or damaged panels can be resurfaced with new Sonatex or Sonaris laminates for reuse in the ceiling. Helps extend life cycle and reduce construction waste. Register on practical completion.
Shall not commence until the building is watertight and dry. This product is designed to be mounted directly, suspended or laid into a two-way exposed grid system and installed to manufacturer’s and AS/NZS 2785:2020 Standard’s requirements. Panels are not to support any weight and equipment shall be independently supported. Hold down clips may be required in areas of wind uplift, and/or air grilles used to balance air pressure. Glue fix method; apply construction adhesive liberally to the back of panel and press firmly to clean, dust free substrate. Z bar framing method; support edge of panels with Z bar, Channel, T bar, Top Hat or timber battens. Suspended type systems requiring seismic design may require a suitably qualified engineer. Care shall be taken when handling panels to avoid damage.
Clean with vacuum, soft brush or damp cloth. Re-surfacing of damaged panels available, consult Asona.
40MM THICK POLYFON - PFW40.1224.N X 1200 X 2400 NUDE WHITE; PFG40.1224.N X 1200 X 2400 NUDE GREY; PFB40.1224.N X 1200 X 2400 NUDE BLACK, 1200 X 600 & 1200 X 1200MM SIZES AVAILABLE TO ORDER. 25MM THICK POLYFON - PFW25.1224.N X 1200 X 2400 NUDE WHITE; PFG25.1224.N X 1200 X 2400 NUDE GREY; PFB25.1224.N X 1200 X 2400 NUDE BLACK, 1200 X 600 & 1200 X 1200MM SIZES AVAILABLE TO ORDER. 15MM THICK POLYFON - PFW15.0612.N X 600 X 1200 NUDE WHITE; PFG15.0612.N X 600 X 1200 NUDE GREY; PFB15.0612.N X 600 X 1200 NUDE BLACK, 600 X 600MM SIZES AVAILABLE TO ORDER.
This product has no warnings associated with it.
