Allproof Industries Polymer Concrete Channel Drainage

Product Description

Design Guidelines

The system design accommodates runs of up to 43 meters, terminating at a sump. A mirror image can then be run in the opposite direction, resulting in maximum length of 86 meters between sumps. Overall system length is unlimited. This may be reduced dependent on required capacities or other constraints. We suggest engaging a Hydraulics Consultant with your exact requirements.

On site mitre cuts are used to form corners, junctions and irregular lengths.

Joints can be sealed with suitable flexible sealant if required.

Outlets are achieved by utilising pre marked knockouts.

Allproof supply a wide range of grates to meet durability and capacity requirements. These include stainless steel, galvanised steel, glass filled nylon and cast iron.

*Note Cast Iron Grates supplied painted black. Oxidisation can occur naturally, is aesthetic, and will not impact on grate performance. Repaint grates as part of maintenance if black finish desired.

End Caps & sumps available to complete the system.

Environmental

Scope

Allproof's Polymer Concrete range is designed for the management of surface water catchment on medium to large areas. Once in the system waste water can then channeled into the storm water system via our matching range of Sumps and Pits.

Grate options cater for a wide variety of requirements, providing excellent solutions for everything from high foot traffic pedestrianised areas to heavy load resistant commercial applications (i.e. loading docks).

New Zealand Building Code (NZBC)

The product will, if employed in accordance with the supplier's installation and maintenance requirements, assist with meeting the following provisions of the building code:

Evidence

The product meets the requirements set out in the following documents, or relevant parts of cited standards within the documents: