Osmo Polyx®-Oil Rapid is a faster drying version of normal Polyx®-Oil. Fast-drying hardwax-oil for interior wooden floors (solid, plank, strip, OSB, cork) and furniture, with added surface hardness.
fast recoat ~4-6 h clear / ~8-10 h coloured availabe; no primer or intermediate sanding
Suitable for timber floors, paneling, sarking, benchtops, cabinetry and joinery as well as other internal timber trim. Microporous - will not crack, peel, flake or blister. Liquid-resistant to DIN 68861-1A / EN 12720, saliva- and perspiration-safe (DIN 53160) and toy-safe (EN 71.3); max 500 g/L VOC.
Food safe when cured, and easy to spot repair if needed. Highly fluid resistant, and meets European standards against saliva, water, tea, coffee, wine and cola etc.
Suitable for children's toys, cots and bassinets.
Available in 750ml, 2.5 litre and 10 litre containers.
Osmo Polyx-Oil Rapid is an interior decorative and protective hardwax-oil for timber and wood-based surfaces: solid and engineered timber floors, plank and strip flooring, stairs, OSB and cork flooring, and furniture. Specify it where a natural, microporous oiled finish is wanted and 2 coats in one day is desired — it is breathable, water- and dirt-repellent, resistant to wine, beer and cola (DIN 68861-1A) and will not crack, peel, flake or blister.
For interior use only. Where slip resistance is required, specify Polyx-Oil Anti-Slip (R11).
Osmo Poly-x Oil is an Alternative Solution
When applied correctly Osmo Poly-x Oil creates a fully cured, water repellant surface that is tested and approved to the below standards
DIN 68861-1A: Liquid and stain-resistant DIN 53160: Saliva and perspiration safe
Osmo Polyx-Oil Rapid is an interior decorative and protective hardwax-oil for timber and wood-based surfaces: solid and engineered timber floors, plank and strip flooring, stairs, OSB and cork flooring, and furniture. Specify it where a natural, microporous oiled finish is wanted & 2 coats in one day is desired — it is breathable, water- and dirt-repellent, resistant to wine, beer and cola (DIN 68861-1A) and will not crack, peel, flake or blister. Select the sheen (gloss, satin, matt or semi-matt) and a clear or coloured option to suit the design; on floors, design for one coloured coat plus a clear top coat. Suitable for children's toys and safe for people, animals and plants once dry (EN 71.3). For interior use only. Not recommended for dark, extractive-rich hardwoods such as Wenge, Merbau or Jatoba — specify Wood Wax Finish Clear Extra Thin instead. Where slip resistance is required, specify Polyx-Oil Anti-Slip (R11).
Apply only to interior timber that is clean, dry (max 20% moisture content) and frost-free. Sand with the grain, finishing at grit P120 (clear) or P120–150 (coloured), then remove all sanding dust, grease, oil and cleaning residues. Ideal conditions are 20–23 °C and 50–65% relative humidity; lower temperatures or higher humidity extend drying. Stir well and apply thinly and evenly with a brush, roller, pad or floor-buffing machine at approx. 30–40 ml/m² (up to 30 m²/L per coat); no primer is needed. Correct any excess within 15 minutes of the first coat. Allow to dry 4–6 hours, with good ventilation, before applying a second thin coat. Two coats total; on floors apply one coloured coat then a clear top coat. Surfaces are walkable after about 12 hours; keep rugs and mats off for about a week until fully cured. Caution: oil-soaked cloths can self-ignite — dry them flat or store in a sealed metal container
Osmo Polyx-Oil is easy to maintain and can be renewed without sanding back the existing finish. For routine care, sweep or vacuum, then mop with a slightly damp (not wet) mop using Osmo Wash and Care; avoid aggressive all-purpose cleaners, which strip the oil-wax layer. Refresh dull or high-traffic areas with Osmo Liquid Wax Cleaner, or recoat with Osmo Maintenance Oil or clear Polyx-Oil, typically once or twice a year depending on wear. Repair scratches and small damage locally with Osmo Polyx-Oil Care and Repair Paste — no full re-sand is needed and repairs blend without visible transitions. After several years, or when heavily worn, clean with Osmo Intensive Cleaner and apply one thin coat of Polyx-Oil to restore protection. Maintenance intervals depend on the level of use and foot traffic.
OSMO POLY-X RAPID CODES MATT: 3232 SATIN: 3262
Osmo Poly-x Rapid is classified as a class 3, flammable goods for shipping
