|
|
Plytech Panels NZ Radiata Structural
NZ Radiata Pine, meets AS/NZS 2269 NZ Building Code.
|
|
|
|
IBuilt CoreClad
New Zealand Wood Products Limited |
A textured ACQ-treated plywood cladding in grooved, ungrooved, primed or natural
|
|
|
|
Hyne I-Built™ Beam 15c
New Zealand Wood Products Limited |
Hyne Beam 15C is a high-strength, aesthetic, glue-laminated timber beam
|
|
|
|
IBuilt JJ-IJoist
New Zealand Wood Products Limited |
I-Joists made from timber flanges and an OSB web for use as residential joists and rafters.
|
|
|
|
J VICE JV100
Glass Vice Products Limited |
Alternative solution to NZS3604 for Mechanical Fixings on in Timber Framing on Decks.
|
|
|
|
Plytech Panels Eliteline
Features a V-groove at 100mm centres. Traditional tongue and groove timber lining appearance
|
|
|
|
CS Cavity Sliders CS BraceWall cavity slider
Cavity slider with integrated bracing panel
|
|
|
|
Paslode Impulse Purlin Nails
Alternative fixing for roof purlin and batten connection. BRANZ appraised (No 1249)
|
|
|
|
Lindsay & Dixon laminated beech
Ideal for draw sides, bed rails and bed slats. Has structural strength, straightness and stability.
|
|
|
|
Prolam PL8 Glulam Beams
Independently tested H3.2, H5 or H1.2 visual or non-visual PL8 strength engineered glulam beams.
|
|
|
|
Prolam Glulam Posts
PL8 or PL12, independently tested, Codemark certified engineered timber posts.
|
|
|
|
KTP sawn timber
Kiwi Timber Protection Ltd |
All standard timber sizes, grades and treatment levels H3 to H6. Suitable for general construction.
|
|
|
|
Prolam Glulam Timber
Structural laminated timber, treated to H5, H3.2 and H1.2, with 2 structural grades, PL8 and PL12.
|
|
|
|
Futurebuild® LVL hy90®
hy90® is a 90mm thick H1.2 treated product with all the benefits of LVL, targeted for use as lintels
|
|
|
|
Prolam PLX Portal
A strong but lightweight timber bracing solution combining three glulam elements and steel.
|
|
|
|
MITEK Truss & Frame Systems
MiTek New Zealand Limited |
The MITEK Truss System is based on MiTek design software and the GANG-NAIL connector plate.
|
|
|
|
BOWMAC Structural Brackets
MiTek New Zealand Limited |
BOWMAC is the NZ made name on today's leading range of structural brackets.
|
|
|
|
Pryda New Zealand Prefabricated timber trusses
Prefabricated timber trusses
|
|
|
|
Interlink Oversized Used-European Bearers
Varied lengths available 2.2m-4.8m; unique 300mm Width face.
Authentic reclaimed used hardwood
|
|
|
|
Hilti HUS-H screw anchors
Used to resist earthquake and wind loads on the bottom plates of timber frame buildings.
|
|
|
|
Touchwood Building System
A complete all-in-one solid wood wall system combining conventional roof and floor construction.
|
|
|
|
Joinery Plywood Euro Poplar
Plymasters Limited Partnership |
Ideal for Motor Homes, Wall linings, Tiny House interiors and Lightweight Cabinetry
|
|
|
|
IBuilt MultiStrut
New Zealand Wood Products Limited |
Open webbed parallel chord floor truss joist utilising steel web brackets and LVL chords.
|
|
|
|
Simpson Strong-Tie Trim Head Weatherboard Screw
For weatherboards, window and door facings, boxed corners and even aluminium window and door jambs.
|
|
|
|
Techlam Laminated Fascia
Curve or straight customized to meet project specific requirements
|
|
|
|
MITEK Posi-STRUT
MiTek New Zealand Limited |
The MITEK Posi-STRUT system is a light economical method of providing large clear spans.
|
|
|
|
Pryda New Zealand Span floor and rafter timber trusses
Span Trusses
|
|
|
|
MITEK FLITCH BEAM
MiTek New Zealand Limited |
MITEK FLITCH BEAM is a composite beam formed with a steel plate sandwiched between timber elements.
|
|
|
|
MITEK GANGLAM
MiTek New Zealand Limited |
MITEK GANGLAM is formed by building up large beam sections from smaller components with truss plates
|
|
|
|
Simpson Strong-Tie Strong-Rod ATS
Continuous rod tiedown solutions for multi-storey, timber-frame in seismic and high-wind areas.
|
|
|